Positioning The Screen And Projector; Positioning The Screen And Projector - Digital Projection E-Vision 6000 Series User Manual

Digital Projection
E-Vision 6000 Series

Positioning The Screen And Projector

1. Install the screen, ensuring that it is in the best position for viewing by your audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the image to fill the screen. Set the adjustable feet so that
the projector is level, and perpendicular to the screen.
Alternatively, five M4 bolts (max length 12 mm [0.5 in]) can be used to attach the projector to a ceiling mount (optional accessory,).
1
4
Location of the ceiling mount holes at the bottom of the projector
Rev D July 2014

POSITIONING THE SCREEN AND PROJECTOR

2
3
5
Installation and Quick-Start Guide
Notes
Ensure that there is at least 50
cm (20 in) of space between the
ventilation outlets and any wall,
and 10 cm (4 in) on all other
sides.
If ceiling mounting, ensure there
is 30 cm (12 in) of space between
the projector and ceiling.
Do not stack the projectors.
Do not tilt the projector more than
±10° from side to side when in
use, as this may cause serious
lamp failure, damage the lamp
module and cause extra cost on
replacement.
±360°
±10°
For details on setting up image and
screen options, see Operating the
Projector later in this Guide.
11