Lan Control Utility; Lan Control Utility; Power On/Off; Picture And Volume Controls - Digital Projection E-Vision 6000 Series User Manual

Digital Projection
E-Vision 6000 Series

LAN Control Utility

It is possible to control some basic functions by using the
embedded LAN Control Utility.
The LAN Control Utility web address is
http://<LAN IP Address>/index.html.
The embedded web page shown here should appear.

Power ON/OFF

Click on the buttons to turn the projector on or into Standby mode.

Picture and Volume controls

Click on the arrows to adjust the settings as required.

Source Select

Click on the buttons to switch to the required input.

Mute

Click to switch video, sound and OSD on or off.

Projector Status

The panel shows the status of the lamps and filters. Click on
Refresh to update the readings.
Rev D July 2014

LAN CONTROL UTILITY

Remote Communications Guide
Notes
The LAN IP Address of the projector
can be set from Installation >
Advanced Setting > Network in the
menu.
Use:
a straight cable to connect to a hub
or network, or
a crossed cable to connect ONLY to
a computer directly.
OSD Mute hides the OSD if it is
displayed. It does not disable it.
The lamp life percentage shown
here is based on expected lamp life
in controlled laboratory conditions.
The actual life may vary depending
on installation environment,
orientation and lamp mode ( Normal
or Eco ).
58