Get Commands - Digital Projection E-Vision 6000 Series User Manual

Digital Projection
E-Vision 6000 Series

Get Commands

ASCII Hex Function
~ q V [CR] 7E 71 56 0D Software Version
~ q P [CR] 7E 71 50 0D Power State
~ q S [CR] 7E 71 53 0D Input Select
~ q L [CR] 7E 71 4C 0D Lamp Hours
~ q L1 [CR] 7E 71 4C 31 0D Lamp1 Hours
~ q L2 [CR] 7E 71 4C 32 0D Lamp2 Hours
~ q B [CR] 7E 71 42 0D Brightness
~ q C [CR] 7E 71 43 0D Contrast
~ q R [CR] 7E 71 52 0D Saturation
~ q N [CR] 7E 71 4E 0D Tint (Video)
~ q A [CR] 7E 71 41 0D Screen
~ q T [CR] 7E 71 54 0D Color Temperature
~ q J [CR] 7E 71 4A 0h Ceiling & Rear
Rev D July 2014
SERIAL PORT CONTROL COMMANDS
Return String
The current software version.
On or Off
One of the following:
Computer1, Computer2, Computer3, Component, Video, S-Video
Between 0 and 2000, between 0 and 2000
Between 0 and 2000
Between 0 and 2000
Between 0 and 100
Between 0 and 100
Between 0 and 100
Between 0 and 100
One of the following: 4:3, 16:9, 15:9, Crop, Letterbox, Native, Normal
One of the following:
5000K, 6500K, 7800K, 8500K, 9300K, 10500K, High-Bright
One of the following: Front, Rear+Ceiling, Rear, Ceiling
Remote Communications Guide
Notes
Spaces are shown in the examples
for clarity, but are NOT used in the
actual commands or replies.
56