Digital Projection
E-Vision 6000 Series
Signal Inputs and Outputs
Computer 1
•
Connect an analog computer (VGA) cable to the 15-pin D-type.
•
Connect a stereo audio cable to the 3.5mm jack.
Computer 2
•
Connect a set of RGsB, RGBHV or YCrCb cables to the BNC connectors.
•
Connect a stereo audio cable to the 3.5mm jack.
Computer 3
•
Connect a DVI-D cable to the DVI connector.
•
Connect a stereo audio cable to the 3.5mm jack below the DVI connector.
Component
•
Connect a set of YPrPb or YCrCb cables to the RCA phono connectors.
•
Connect a pair of audio cables to the L and R audio connectors or a single
audio cable to the L connector.
Video or S-Video
•
Connect a composite video cable to the single RCA phono connector, or an
S-Video cable to the 4-pin mini-DIN.
•
Connect a pair of audio cables to the L and R audio connectors or a single
audio cable to the L connector.
Monitor Out
•
Connect an analog monitor (VGA) cable to the 15-pin D-type.
•
Connect a stereo audio cable to the 3.5mm jack.
Rev D July 2014
SIGNAL INPUTS AND OUTPUTS
Connection Panel
Connection Guide
Notes
For a complete listing of pin
configurations for all signal and
control connectors, see Wiring
Details later in this Guide.
Monitor Out only displays the input
from Computer 1.
17