Information Menu; Usage Time Tab; Input Tab; Network Tab - Digital Projection E-Vision 6000 Series User Manual

Digital Projection
E-Vision 6000 Series

Information menu

The information menu is arranged in four tabs: Usage time, Input, Network
and Version.

Usage time tab

Displays information about lamp usage, projector running time and filter time.

Input tab

Displays information about the active source.

Network tab

Displays network information.

Version tab

Displays the model name and firmware version.

Reset menu

The Reset menu allows you to restore factory default settings. You can
choose to reset the following:
•
Current signal
All items in the Adjust menu can be reset.
•
All data
Resets all settings apart from Language
Security , Network mode , Communication speed
remaining , Lamp time and Filter time
•
Clear lamp1 time, Clear lamp2 time and Clear filter time
Use when replacing lamps or cleaning the filter.
To reset any of the above settings:
1. Select one of the options and click
2. In the confirmation dialog, select
your choice.
Rev D July 2014
, Background, Key lock ,
, Lamp life
.
ENTER .
and click again to confirm
OK ENTER
A TOUR OF THE MENUS
Information
Usage time
Usage time Input Network
Lamp1 life remaining
Lamp2 life remaining
Lamp1 time 1000[H]
Lamp2 time 1000[H]
PJ time 1000[H]
Filter time 1000[H]
Reset
Current signal
All data
Clear lamp1 time
Clear lamp2 time
Clear filter time
!
Are you sure?
OK Cancel
Notes
Version
The lamp life percentage shown
50%
here is based on expected lamp life
50% in controlled laboratory conditions.
The actual life may vary depending
on installation environment,
orientation and lamp mode (
or Eco ).
Network settings are configured
in the Network setting menu. Go
to the Setting > Installation >
Network setting.
Operating Guide
Normal
46