Digital Projection
LAN CONFIGURATION
Remote Communications Guide
E-Vision 6000 Series
LAN Configuration
Notes
It is possible to assign a Host Name and Domain Name to
the projector, and to set up an Alert Mail address and PJLink
password:
The URL of the LAN Configuration page is
http://<LAN IP Address>/lanconf.html.
The embedded web page shown here should appear.
Settings
Host Name
Up to 60 alpha-numeric characters can be entered. Press the
button to confirm the new name.
Apply
Domain Name
Up to 60 alpha-numeric characters. Press the
button to
Apply
confirm the new name.
Mail
When enabled, an email will be sent to up to three specified
addresses, when the lamp reaches the end of its usable life, or if
an error occurs on the projector. Press the
button to confirm
Apply
the new settings.
A test mail can be sent to check that the settings have been made
correctly. Press the
Execute
button to send the test message.
Rev D July 2014
59