Changing Slider Values; Executing Commands; Editing Numeric Fields - Digital Projection E-Vision 6000 Series User Manual

Digital Projection
E-Vision 6000 Series

Changing slider values

1. Navigate to the menu item and press the
arrow to adjust the value.
2. When ready, press MENU or RETURN

Executing commands

Select a command item and press ENTER
In some cases you will see a confirmation message. Use the
RIGHT arrows to select OK or RETURN
confirm your choice.

Editing numeric fields

1. Navigate to the item containing the fields and press
2. Move from field to field within the line using the
RIGHT arrows.
3. Alter the value of a field by pressing the
Once you have made your changes on the page, navigate to the
Apply Settings command and press
Rev D July 2014
or
LEFT RIGHT
to exit the slider.
to execute it.
LEFT and
, and press ENTER again to
ENTER to access it.
and
LEFT
and arrows.
UP DOWN
ENTER to execute it.
USING THE MENUS
Menu Title
Active Tab Tab 1 Tab 2
Sub-menu 1
Sub-menu 2
Setting 1 Current value
Setting 2 Current value
Slider
Active Item 123 123 . 456 . 789 . 012
Numeric Field 123 . 456 . 789 . 012
Apply settings
Some menu options and controls
may not be available due to settings
in other menus. These will be
shaded gray on the actual menu.
Tab 3
50
Operating Guide
Notes
34