Changing The Color Wheel - Digital Projection E-Vision 6000 Series User Manual

Digital Projection
E-Vision 6000 Series

Changing the color wheel

1. Slide open the lamp compartment cover as shown in the picture.
2. Unscrew the four captive screws securing the color wheel.
3. Remove the color wheel.
1
4. Insert a new color wheel.
5. Fasten the screws.
6. Replace the lamp compartment cover.
4
Rev D July 2014
CHANGING THE LENS, LAMPS AND COLOR WHEEL
2
5
3
6
Installation and Quick-Start Guide
Notes
A four-segment color wheel,
optimized for brightness, is fitted as
standard. Use the six-segment color
wheel for optimized color.
Keep the unused color wheel in the
zipper bag in which the six-segment
color wheel was packaged. The
bag prevents dust from falling or
collecting on the color wheel.
The lamp and color wheel must be
changed only by suitably qualified
personnel.
10