Changing The Lamp - Digital Projection E-Vision 6000 Series User Manual

Digital Projection
E-Vision 6000 Series

Changing the lamp

1. Slide open the lamp compartment cover as shown in the picture.
2. Unscrew the two captive screws securing the lamp module.
3. Pull firmly upwards on the handle to remove the lamp module.
1
4. Insert a new lamp module.
5. Fasten the screws.
6. Replace the lamp compartment cover.
4
Rev D July 2014
CHANGING THE LENS, LAMPS AND COLOR WHEEL
2
5 6
3
Installation and Quick-Start Guide
Notes
The lamp and color wheel must be
changed only by suitably qualified
personnel.
9