Installation Tab - Continued - Digital Projection E-Vision 6000 Series User Manual

Digital Projection
E-Vision 6000 Series
Setting menu continued...

Installation tab - continued

•
RC sensor
Controls whether the projector will use the infrared sensor at the front, the one at the back, or both.
•
Network setting
This sub-menu allows you to adjust network settings.
•
Standby mode
Choose between Normal and Power-saving
•
PC control
Choose from PC Control (RS232) or
Rev D July 2014
standby mode.
Network (LAN) as the remote connection used for external control of the projector.
A TOUR OF THE MENUS Operating Guide
Notes
Setting menu
Installation tab
See the next page for a detailed
description of all settings and
commands available from the
Network setting sub-menu.
In Power-saving standby mode the
following functions are not available:
- Monitor Out
- HTTP server functions
- Network mode
so it will not be possible to turn the
projector on remotely, except via the
Serial Port.
In standby mode, the
Normal
Warning indicator shows a green
light, while in Power-saving mode it
is unlit.
43