Gefen GTB-HD4K2K-442-BLK User Manual page 76

Advanced Operation
#show_r
The #show_r command displays the current routing status of the output. The name of the
output and input are displayed.
Syntax:
#show_r param1
Parameters:
param1
Example:
#show_r 2
OUTPUT 2(Sony_XBR) IS ROUTED TO INPUT 3(Blu-ray)
r
The r command routes the specified input to the output. Do not precede this command
with the "#" symbol. Also see the
be routed to all outputs. param3 is optional but can be used to specify another output on
the command line.
Syntax:
r param1 param2 [param3]
Parameters:
param1
param2
param3
Example:
r 3 1 2
INPUT 3 IS ROUTED TO OUTPUT(S) 1 , 2
Output
s command. If param1 = 0, then the specified input will
Input
Output
Output
page | 66
Commands
[1 ... 2]
[0 ... 4]
[1 ... 2]
[1 ... 2]