Advanced Operation
Commands
#show_fst
The #show_fst command displays the switching mode for the specified input.
If param1 = 0, then the switching mode for all inputs are displayed.
Syntax:
#show_fst param1
Parameters:
Input
[0 ... 4]
param1
Examples:
#show_fst 2
INPUT 2 FST STATUS IS SLOW
#fst_slow 0
INPUT 1 FST STATUS IS SLOW
INPUT 2 FST STATUS IS FAST
INPUT 3 FST STATUS IS SLOW
INPUT 4 FST STATUS IS SLOW
page | 57