Advanced Operation
Commands
#ipconfig
The #ipconfig command displays the current TCP settings.
Syntax:
#ipconfig
Parameters:
None
Example:
#ipconfig
IP Configuration is :
IP: 192.168.2.190
NETMASK: 255.255.255.0
GATEWAY: 192.168.1.254
#resetip
The #resetip command resets the IP configuration to factory-default settings.
The matrix must be rebooted after executing this command.
Syntax:
#resetip
Parameters:
None
Syntax:
#resetip
IP CONFIGURATION WAS RESET TO FACTORY DEFAULTS
IP: 192.168.1.72
Netmask: 255.255.255.0
Gateway: 192.168.1.1
page | 45