Gefen GTB-HD4K2K-442-BLK User Manual page 63

Advanced Operation
#sipadd
The #sipadd command sets the IP address of the matrix. The IP address must be
entered using dot-decimal notation. The matrix must be rebooted after executing this
command. The default IP address is 192.168.1.72. Use the
command to display the current IP address of the matrix.
Syntax:
#sipadd param1
Parameters:
param1
Example:
#sipadd 192.168.2.190
IP ADDRESS 192.168.2.190 IS SET.
#snetmask
The #snetmask command sets the subnet mask. The net mask must be entered using
dot-decimal notation. The matrix must be rebooted after executing this command.
The default net mask is 255.255.255.0. Use the
command to display the current net mask of the matrix.
Syntax:
#snetmask param1
Parameters:
param1
Example:
#snetmask 255.255.0.0
NETMASK ADDRESS 255.255.0.0 IS SET. PLEASE REBOOT THE UNIT.
IP address
Net mask
page | 53
#show_ip
#show_netmask or #ipconfig
Commands
or #ipconfig