Advanced Operation
Commands
#hdp_pulse
The #hpd_pulse command cycles the HPD line on the specified input. Issuing this
command is identical to physically disconnecting and reconnecting the cable between the
source and the matrix. If param1 = 0, then all inputs will receive the HPD pulse.
Syntax:
#hpd_pulse param1
Parameters:
Input
[1 ... 4]
param1
Examples:
#hpd_pulse 1
HPD PULSE HAS BEEN SENT TO INPUT 1
#hpd_pulse 0
HPD PULSE HAS BEEN SENT TO ALL INPUTS
page | 28