Table of Contents
Advertisement
Advanced Operation
#set_webui_op_pass
The #set_webui_ad_pass command sets the Operator password for the Web GUI.
The default password is Admin.
Syntax:
#set_webui_op_pass param1
Parameters:
param1
Example:
#set_webui_op_pass minion
WEB UI OPERATOR PASSWORD IS SET
#sgateway
The #sgateway command sets the gateway address. The gateway must be typed using
dot-decimal notation. The matrix must be rebooted after executing this command.
The default gateway is 192.168.1.1.
Syntax:
#sgateway param1
Parameters:
param1
Example:
#sgateway 192.168.1.5
GATEWAY ADDRESS 192.168.1.5 IS SET. PLEASE REBOOT THE UNIT.
Password
Gateway
page | 48
Commands
Advertisement
Table of Contents
