Advanced Operation
#set_ir
The #set_ir command sets the IR channel for the matrix. The default IR channel setting
is 0. The IR channel for the switch can also be set under the Configuration tab within the
Web interface. See
Configuration ► System Configuration
Syntax:
#set_ir param1
Parameters:
param1
Example:
#set_ir 1
IR CHANNEL IS SET TO CHANNEL 1
Channel
Channel
Description
0
Set IR channel 0
1
Set IR channel 1
2
Set IR channel 2
3
Set IR channel 3
page | 34
Commands
for more information.
[0 ... 3]