Table of Contents
Advertisement
Getting Started
ID
Name
1
FST (Fast / Slow)
2
Audio (2ch / Multi-ch)
3
EDID (Int / Ext)
4
Out 1 / Out 2 (selection)
5
In (1 - 4)
6
Out 1 / Out 2 (outputs)
7
Power
8
RS-232
9
IR Ext
Description
Use this recessed button to switch between
Fast and Slow FST (Fast Switching
Technology) modes. See
Slow Mode
FST mode. The LED indicators will display
the current mode.
Use this recessed button to switch between
2CH and Multichannel audio on the output.
The LED indicators will display the current
mode. See
more information on using this feature.
Use this recessed button to switch between
internal (Int) and external (Ext) EDID
modes. The LED indicators will display
the current mode. See
Mode
Consecutively press the Out 1 button
to route the desired input to Out 1.
Consecutively press the Out 2 button to
select the desired input for Out 2.
See
Routing Inputs to Outputs
information. The LED indicators will
display the current routing state.
Connect an HDMI cable from an Ultra
Hi-Def source to any of these HDMI ports.
Connect an Ultra HD display to each of
these ports using an HDMI cables.
This LED indicator will glow bright blue
when the included 5V DC power supply
is connected between the matrix and an
available electrical outlet.
Connect an RS-232 cable from this port to
an RS-232 device. See
Configuration
Connect an IR Extender (Gefen part no.
EXT-RMT-EXTIRN) to this port.
(continued on next page)
page | 3
Fast Mode vs
for more information on using
Selecting the Audio Mode
Selecting the EDID
for more information.
RS-232 and IP
for more information.
Panel Layout
for
for more
Advertisement
Table of Contents
