Gefen GTB-HD4K2K-442-BLK User Manual page 41

Advanced Operation
Commands
#reboot
The #reboot command reboots the matrix. Executing this command is the equivalent
of disconnecting and reconnecting the AC power cord, on the back of the matrix.
The matrix must be rebooted after changing any of the IP settings.
Syntax:
#reboot
Parameters:
None
Example:
#reboot
MATRIX WILL REBOOT SHORTLY *REBOOT UNIT IN 3 SECONDS
GTB-HD4K2K-442 v0.7U
page | 31