Advanced Operation
#set_telnet_port
The #set_telnet_port command sets the Telnet listening port. The matrix must
be rebooted after executing this command. The default port setting is 23. Use the
#show_telnet_port
Syntax:
#set_telnet_port param1
Parameters:
param1
Example:
#set_telnet_port 24
TELNET COMMUNCATION PORT 24 IS SET. PLEASE REBOOT THE UNIT.
#set_webui_ad_pass
The #set_webui_ad_pass command sets the Administrator password for the Web GUI.
The password is case-sensitive and cannot exceed 7 characters in length. The default
password is Admin.
Syntax:
#set_webui_ad_pass param1
Parameters:
param1
Example:
#set_webui_ad_pass bossman
WEB UI ADMINISTRATOR PASSWORD IS SET
command to display the current Telnet listening port.
Port
Password
page | 47
RS-232 / IP Commands
[1 ... 1024]