Table of Contents
Advertisement
Advanced Operation
Commands
n
The n command displays the routing status of the output. Do not precede the n command
with the "#' symbol. param1 must be set to 1. If param1 = 0, then the routing state for all
outputs is returned.
Syntax:
n param1
Parameters:
Output
[0 ... 2]
param1
Examples:
To see how this command works, we have already routed Input 3 to Output 1.
Now, we'll use the n command to query the routing state of Output 1:
n 1
A3
The feedback is abbreviated as: "A3". This indicates that Input 3 is routed to Output 1.
The following command returns the routing state for all outputs:
n 0
A3B2
The feedback is abbreviated as: "A3B2". This indicates that Input 3 is routed to Output 1
and Input 2 is routed to Output 2.
page | 41
Advertisement
Table of Contents
