Advanced Operation
#show_bank_name
The #show_bank_name command displays the name for the specified EDID bank.
To name an EDID bank, use the
Syntax:
#show_bank_name param1
Parameters:
param1
Example:
#show_bank_name 5
THE NAME FOR BANK 5 IS : Dell24
#show_input_name
The #show_input_name command displays the name of the specified input. To name an
input, use the
#set_input_name
Syntax:
#show_input_name param1
Parameters:
param1
Example:
#show_input_name 3
THE NAME FOR INPUT 3 IS : Blu-ray
#set_bank_name
Bank
command.
Input
page | 64
command.
[1 ... 8]
[1 ... 4]
Commands