Table of Contents
Advertisement
Advanced Operation
Commands
#show_ip
The #show_ip command displays the current IP address of the matrix. Use the
#sipadd
command to set the IP address.
Syntax:
#show_ip
Parameters:
None
Example:
#show_ip
IP ADDRESS IS: 192.168.1.239
#show_mac_addr
The #show_mac_addr command displays the MAC address of the matrix.
Syntax:
#show_mac_addr
Parameters:
None
Example:
#show_mac_addr
MAC ADDRESS IS: 00-1c-91-03-00-02
page | 50
Advertisement
Table of Contents
