H3C S7500E Series Installation Manual page 45

Figure 26 PSR2800-ACV panel
1: Captive screw
3: Power cable retainer suite
5: Power module status LED
7: PoE power switch (O: off. —: on)
Connecting the PSR6000-ACV power cable
The PSR6000-ACV is a built-in power module with AC input and DC output. It can provide the switch with
both system power and PoE power, which can be controlled through separate power switches. Before
connecting the PSR6000-ACV power cable, make sure that the system and PoE power switches are off.
The PSR6000-ACV provides four power sockets:
• One system power socket, as shown in callout 5
Three PoE power sockets, as shown in callout 8
•
Connecting the system power cable is the same as the PoE power cable. The following illustrates how to
connect the system power cable.
2: System power socket
4: System power switch (O: off; —: on)
6: PoE power socket
8: Power module handle
onFigure 27.
onFigure 27.
34