H3C S7500E Series Installation Manual page 148

NOTE:
A quick blinking RUN LED indicates that the card is in the process of startup rather than operating
properly. The ALM LED will be on for a period of time when the system starts up.
SRPU active/standby status LED (ACTIVE)
The SRPUs provide the active/standby status LED (ACTIVE) to indicate the status—active or standby—of
the SRPUs.
Table 59 SRPU active/standby status LED description
LED
ACTIVE
CF card status LED (CFS)
The SRPUs provide a CF card status LED (CFS) to indicate the status of the CF card.
Table 60 CF card status LED description
LED
CFS
RJ-45 Ethernet interface status LED
The SRPUs provide RJ-45 Ethernet interface status LEDs to indicate the link status and data
receiving/forwarding status of the corresponding Ethernet interfaces.
Table 61 RJ-45 Ethernet interface status LED description
LED
RJ-45 Ethernet interface status LED
Combo port status LED
A combo port comprises an SFP interface and an RJ-45 Ethernet interface. Only one interface of a
combo port can work at a time. The SRPUs provide a combo port status LED to indicate the link status and
data receiving/forwarding status of the corresponding combo port.
LED status
On
Off
LED status
On
Off
LED status
Blinking
On
Off
137
Description
The SRPU is active.
This status occurs in the following cases:
•
The SRPU is in standby status.
•
The SRPU is faulty. Check the card LED
to confirm the problem.
Description
The CF card is in position.
The CF card is not in position or is
damaged.
Description
The Ethernet interface is receiving
or sending data.
A link is present.
No link is present.