Transceiver Module Ordering Guide; Ac Power Cable; Ac Power Cable Overview - H3C S7500E Series Installation Manual

Table 49 100-Mbps SFP module specifications
100-Mbps SFP module
SFP-FE-SX-MM1310-A
SFP-FE-LX-SM1310-A
SFP-FE-LH40-SM1310
SFP-FE-LH80-SM1550
SFP-FE-LX-SM
1310-BIDI
SFP-FE-LX-SM
1550-BIDI
Table 50 EPON interface module specifications
EPON interface module
SFP-GE-PX10-D-SM1490-A
SFP-GE-PX20-D-SM1490-A

Transceiver module ordering guide

Some SRPUs and LPUs of the S7500E series switches support transceiver modules. For more information,
see Table 37
available on the interfaces and actual service requirements.

AC power cable

AC power cable overview

AC power cables are used for connecting the power modules of an S7500E switch to the external AC
power supply system.
Select proper AC power cables according to the power of the power module.
•
The connector type varies by country or region. Select a compliant connector type as needed.
•
Central
wavelength
1310nm
1310nm
1310nm
1550nm
TX: 1310nm
The two
modules
RX: 1550nm
must be
TX: 1550nm
used
together.
RX: 1310nm
Central
wavelength
TX: 1490nm
RX: 1310nm
TX: 1490nm
RX: 1310nm
and Table 39. You can order transceiver modules according to the transceiver modules
Connector Cable specifications
50/125 μm multimode fiber
LC
62.5/125 μm multimode fiber
LC 9/125 μm single-mode fiber
LC 9/125 μm single-mode fiber
LC 9/125 μm single-mode fiber
LC 9/125 μm single-mode fiber
LC 9/125 μm single-mode fiber
Connector Cable specifications
SC 9/125 μm single-mode fiber
SC 9/125 μm single-mode fiber
127
Maximum
transmission
distance
2 km (1.24
miles)
15 km (9.32
miles)
40 km (24.86
miles)
80 km (49.71
miles)
15 km (9.32
miles)
15 km (9.32
miles)
Maximum
transmission
distance
10 km (6.21
miles)
20 km (12.42
miles)