H3C S7500E Series Installation Manual page 51

Table 10 Cards supporting PoE
Card model
LSQ1GV48SD0
LSQ1CGV24PSC0
LSQ1GV24PSC0
LSQ1GV24PSA0
LSQ1FV48SA0
LSQ1GV48SA0
LSQ1GV48SC0
LSQ1GV40PSC0
NOTE:
The following PoE types are available:
Type 1—Power delivered by a single port: 0 to 15.4 W; voltage range: 44 V to 57 V; maximum current:
•
350 mA. This PoE type provides power to classes 0 to 3 PDs.
• Type 2: Power delivered by a single port: 0 to 30 W, voltage range: 50 V to 57 V, maximum current:
600 mA. This PoE type provides power to classes 0 to 4 PDs.
Power modules supporting PoE
The power modules PSR650-A/PSR650-D/PSR320-A/PSR320-D for the S7502E and S7503E-S do
•
not support PoE. To enable PoE on these switches, use an external PoE power supply (for example,
RPS800-A). For how to connect an external PoE power supply, see
power
To implement PoE on the S7503E, S7506E, S7506E-V, or S7510E, you can select power modules
•
supporting PoE. For description of the power modules supporting PoE, see
Table 11 Power modules supporting PoE
Power module
model
PSR1400-D
PSR2800-ACV
Number of
POE-capable
ports
48
24
24
24
48
48
48
40
supply."
PoE maximum power output
6720 W
1150 W (110 V)
1400 W (220 V)
PoE DIMM
No PoE DIMM needed
24-port PoE DIMM (LSQM1POEDIMMS0)
PoE master/subordinate DIMM
(LSBM1POEDIMMH)
Separate
PoE power
cable
No
Yes
40
PoE type
Type1, Type2
Type 1
"Connecting an external PoE
Table 1 1.
Power cable connection
Connecting the PSR1400-D power
cable
Connecting the PSR2800-ACV power
cable