Replacing An Air Filter For The Other Models - H3C S7500E Series Installation Manual

S7500e series ethernet switches
Hide thumbs Also See for S7500E Series:
Table of Contents

Advertisement

Figure 54 Replace an air filter for S7506E-V
1: Loosen the captive screws on the air filters with a screw driver

Replacing an air filter for the other models

Follow these steps to replace an air filter:
Loosen the captive screw on the air filter, as shown in callout 1 on
Step1
Seize the captive screws on the air filter and slowly pull the air filter out of the chassis, as shown in callout
Step2
2 on
Figure
Install the cleaned air filter to the switch. For the installation procedures, see the chapter "Installing the
Step3
switch."
55.
2: Remove the air filters from the chassis
99
Figure
55.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S7503eS7506eS7510eS7506e-v

Table of Contents