H3C S7500E Series Installation Manual page 31

Figure 13 Install the cable management bracket to the left mounting bracket
4
1
1: Left mounting bracket
3: Screw hole for installing the cable management
bracket
Installing the mounting brackets
Before installing the switch to the rack, install the mounting brackets to the chassis, as shown in
S7506E-V: Facing the front of the switch, mount the left and right mounting bracket to the two sides
•
of the switch.
Other models: Facing the front of the switch, mount the mounting bracket with a cable management
•
bracket to the left of the switch, and mount the mounting bracket without a cable management
bracket to the right of the switch (where the fan tray is located).
Figure 14 Install the mounting brackets (S7503E)
1: Screws for fixing the mounting brackets to the chassis
3: Right mounting bracket
3
2
2: Cable management bracket
4: Screw for fixing the cable management bracket to
the left mounting bracket
2: Left mounting bracket
20
Figure 14.