SRPU model
LSQ1SRP2XB0
(Salience VI-10GE)
NOTE:
A combo port is a logical port that comprises an SFP interface and an RJ-45 Ethernet interface. Only
•
one of them can be active at a time, and the other is inactive. By default, the interface with a smaller
number is active.
To use an inactive interface of the combo port, use the undo shutdown command to activate the
•
interface. When the interface is activated, the previous active interface of the combo port is
automatically shut down and becomes inactive.
SRPU ordering guide
Table 38
shows the models and number of SRPUs that an S7500E chassis supports.
NOTE:
The S7500E series except the S7503E-S supports two SRPUs, which must be of the same model.
•
•
In
Table
The model of a card is LSQM-prefixed on the card package and LSQ-prefixed on the card panel. For
•
example, LSQ1MPUA0 and LSQM1MPUA0 identify the same card. When you order a card, you refer
to the card by its LSQM-prefixed model. In this chapter, the card models are LSQ-prefixed, the same as
marked on the card panels.
Table 38 SRPU ordering guide
Applicable chassis
(right)
SRPU model
(below)
LSQ1MPUA0
LSQ1CGP24TSC0
LSQ1CGV24PSC0
LSQ1MPUB0
(Salience VI-Lite)
LSQ1SRPA0
(Salience VI-Smart)
LSQ1SRPB0
(Salience VI)
LSQ1SRPD0
(Salience VI-Plus)
External interfaces
Console
port
One
38, " " indicates compatible, and "—" indicates incompatible.
S7502E
—
—
—
—
—
—
Management
Ethernet port
(10/100BASE-TX)
One
S7503E-
S7503E
S
—
—
—
—
—
—
—
—
—
114
CF card
Other interfaces
interface
2 × 10-Gigabit XFP interfaces
One
(LC)
S7506E-
S7506E
S
—
—
—
—
—
—
—
—
—
—
S7506E-
S7510E
V
—
—
—
—
—
—
—
—