H3C S7500E Series Installation Manual page 46

Figure 27 PSR6000-ACV panel
1: Captive screw
3: Power module status LED
5: System power socket
7: Power module handle
The PSR6000-ACV is shipped with a power cable retainer suite. Before connecting the power cable to
the PSR6000-ACV, attach the retainer suite to the power cable.
Follow these steps to attach the power cable retainer suite:
Fasten the retainer suite to the plug of the power cable. Attach the left and right parts of the retainer suite
Step1
to the power cable according to the relative positions shown in
the screw holes of the retainer suite to those on the power module.
Use a No.1 Phillips screwdriver to fasten the two parts of the retainer suite together.
Step2
2: PoE power switch (O: off; —: on)
4: Fastening screw holes for the power cable retainer suite
6: System power switch (O: off; —: on)
8: PoE power sockets
35
Figure 28. Otherwise, you cannot align