Top Speaker - HP ZBook Studio G5 Maintenance And Service Manual

Top speaker

Description
Top speaker
Before removing the top speaker, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the system board (see
Remove the top speaker:
1. Remove the four Phillips M2.0×3.0 screws (1) that secure the top speaker to the computer.
2. Remove the speaker from the computer (2).
Reverse this procedure to install the top speaker.
66 Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
Battery on page 35).
System board on page
33).
59).
Spare part number
L28672-001 (Speaker Kit)