Warning: By default, COM1~3 are assigned to inherent functions on the mobile
computer. If the settings of any of these COM ports are changed to N/A,
the original function will be disabled!
Default button restores all COM port settings back to factory default.
Upon system reboot, the mobile computer checks whether there is a registry
entry for Bluetooth Serial Port Profile (SPP) or Dial-up Profile (DUN). These
profiles (if existent) are assigned to fixed ports and cannot be re-assigned.
Check if any COM ports are occupied by Bluetooth SPP before editing COM port
function.
After editing COM port settings, tap OK command on the softkey bar. A prompt
will appear warning that the system needs to reboot in order to apply settings.
Tap OK to reboot, or Cancel to discard changes.
If two ports are assigned the same function, a pop up dialog appears when OK
is tapped to warn that one of these ports must be changed.
CONTRAST
Provides a slidebar to set the contrast for the screen display.
Along with
Adjust
comfortable display mode.
CUSTOMER FEEDBACK
Submits feedback about Windows Embedded Handheld 6.5 to help Microsoft
improve the software for this platform.
ENCRYPTION
Encrypts the files placed on the storage card so the encrypted files are only
readable on that specific mobile computer.
ERROR REPORTING
Enables/disables the mobile computer to auto-collect and report errors to Microsoft
to help them improve products.
EXTERNAL GPS
Configures external GPS receiver in use by the mobile computer. Three tabs are
featured – Access, Programs and Hardware.
Tab Page
Description
Access
Enables/disables the system's access to the external GPS device.
Programs
Sets the software port for GPS software and location-aware applications
to stream GPS data.
Hardware
Sets the hardware COM port and Baud rate for the external GPS
receiver.
MANAGED PROGRAMS
Views the applications remotely installed by your domain's system administrator.
Backlight, make adjustments to the screen to achieve a most
Chapter 6 Manage Mobile Computer
175
Need help?
Do you have a question about the 9700 and is the answer not in the manual?