CipherLab 9700 Reference Manual page 202

Length option
Interleaved 25
Interleaved 25
Length option
Verify Check Digit
Transmit Check Digit
Convert To EAN-13
GS1 DATABAR
GS1 DataBar-14
GS1 DataBar Limited
GS1 DataBar Expanded
GS1 DataBar Convert to UPC/EAN
MSI
MSI
MSI
Length option
Check Digit Option
Transmit Check Digit
Sets the length of the Discrete 2 of 5 symbols to decode.
 One Fixed length (Length 1)
 Two Fixed lengths (Length 1>Length 2)

Max / Min Length (range: 0-55; Length 1<Length 2)
 Any Length
Checkbox to enable Interleaved 2 of 5 decoding.
Sets the length of the Interleaved 2 of 5 symbols to decode.
 One Fixed length (Length 1)
 Two Fixed lengths (Length 1>Length 2)
 Max / Min Length (range: 0-55; Length 1<Length 2)
 Any Length
Decide whether to verify the check digit. If desired, select
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
 Disable
 USS Check Digit

OPCC Check Digit
Decide whether to include the check digit in the data being
transmitted.
Convert a 14-character Interleaved 25 barcode into EAN-13
if the following requirements are met:
The barcode must have a leading 0 and a valid EAN-13 check
digit.
Checkbox to enable MSI decoding.
Sets the length of the MSI symbols to decode.
 One Fixed length (Length 1)
 Two Fixed lengths (Length 1>Length 2)
 Max / Min Length (range: 0-55; Length 1<Length 2)

Any Length
One check digit is mandatory for decoding MSI barcodes.
Select whether a second check digit should be verified. If the
check digits are incorrect, the barcode will not be accepted.
 One Check Digit

Two Check Digits
Decide whether to include the check digit in the data being
transmitted.
Appendix II Laser (SE955)
Max / Min
Length
(4-55)
Enable
Enable
Max / Min
Length
(4-55)
Disable
Disable
Disable
Enable
Enable
Enable
Disable
Enable
Enable
Max / Min
Length
(4-55)
One Check
Digit
Disable
191