CipherLab 9700 Reference Manual page 204

Preamble
Convert to UPC-A
Transmit Check Digit
UPC/EAN General Preference
Support Coupon Code
UPC/EAN Addon Option Decide whether to decode EAN-8, EAN-13, UPC-E0, UPC-E1
UPC/EAN Addon
Redundancy
UPC/EAN Security Level Sets the security level to ensure decoding accuracy
Decide whether to
preamble System Character (and Country Code) in the data
being transmitted.
 No transmit: transmits none of the above

Transmit System Character: transmits system number
only
 Transmit Sys. Character and Country Code: transmits
system number and country code
The UPC-E1 barcode will be expanded into UPC-A format,
and the next process will follow the settings configured for
UPC-A.
Decide whether to include the UPC-E1 check digit (the last
character in the barcode) in the data being transmitted.
Reads UPC-A barcodes starting with "5", EAN-13 barcodes
starting with "99", and UPC-A/EAN-128 Coupon Codes.
 UPC-A, EAN-13, and GS1-128 must be enabled first!

Use "Addon Redundancy" to control auto-discrimination
of the GS1-128 (right half) of a coupon code.
or UPC-A with addons (including Addon 2 and 5).
 Ignore Addon

Decode only with addons
 Auto-discriminate
When "Auto-discriminate" is applied, decide the number of
times of supplementary decoding the same barcode to count
as a valid read. Configurable between 2 and 30.
considering the printed quality of the barcodes such as Code
128, Code 93, and UPC/EAN. The higher the level is, the
more security is ensured. Options are:
Level Description
0 With this default, the scan engine is aggressive
enough to decode most "in-spec" barcodes.
1 Select this level if misdecodes have occurred. It
fixes most misdecodes.
2 Select this level if Level 1 should fail to eliminate
misdecodes.
3 Select this level if Security Level 2 should fail to
prevent misdecodes. However, as this level
actually impairs the decoding ability of scan
engine, it'd be better to improve the barcode's
print quality if this level should be needed.
include the UPC-A/UPC-E/UPC-E1
Appendix II Laser (SE955)
Transmit
System
Character
Disable
Enable
Disable
Ignore Addon
10
Level 2
193