Panasonic S-45PU1E5 Technical Data & Service Manual page 360

Sensor Temperature Display Function
(displayed regardless of whether unit
is operating or stopped)
The procedure below displays the sensor
temperatures from the remote controller, indoor unit,
and outdoor unit on the remote controller.
<Procedure>
1 Press and hold the
simultaneously for 4 seconds or longer.
2 The unit No. "X-X" (main unit No.), item code "XX"
(sensor address), and servicing monitor "
(sensor temperature) are displayed on the remote
controller LCD display. (See Fig. 7-4 at right.)
3 Press the temperature setting
buttons and select the item code to the address of
the sensor to monitor.
(For the relationships between the sensor
addresses and sensor types, refer to the table of
temperature sensors and addresses at below.)
4 If group control is in effect, press the
button to select the unit to monitor.
Press the temperature setting buttons to select the
item code to change.
5 Press the
controller display.
Indoor unit sensors
02 Intake temp.
03 E1
04 E2
05 E3
06 Discharge temp.
07 Discharge temp. setting
Position of indoor unit
08
electronic control valve
7
and buttons
/
button to return to normal remote
Unit No.1 Unit No.2 Unit No.3 Unit No.4
"
1
5
Note:
The temperature display appears as "- - - -" for units
that are not connected.
* If monitor mode is engaged while normal operation
is in progress, only the parts of the LCD display
shown in the figure will change. Other parts
continue to display the same information as during
normal operation.
Outdoor unit sensors
0A 2A 4A
0B 2B 4B
0C 2C 4C
0D 2D 4D
0E 2E 4E
0F 2F 4F
10 30 50
11 31 51
12 32 52
13 33 53
14 34 54
15 35 55
16 36 56
17 37 57
18 38 58
19 39 59
1A 3A 5A
1B 3B 5B
1C 3C 5C
1D 3D 5D
1E 3E 5E
1F 3F 5F
20 40 60
21 41 61
22 42 62
7-16
2
4
Fig. 7-4
6A Discharge temp. 1
6B Discharge temp. 2
6C High-pressure sensor temp.
6D Heat exchanger gas 1
6E Heat exchanger liquid 1
6F Heat exchanger gas 2
70 Heat exchanger liquid 2
71 Outdoor air temp.
72 –
73 For inspection
74 CT2
75 For inspection
76 For inspection
77 Discharge temp. 3
78 CT3
79 For inspection
7A For inspection
7B Heat exchanger gas 3
7C Heat exchanger liquid 3
7D Low-pressure sensor temp.
7E Receiver temp.
7F Oil 1
80 Oil 2
81 Oil 3
82 For inspection
3
CZ-RTC2