Remote Controller Servicing Functions; Test Run Function - Panasonic S-45PU1E5 Technical Data & Service Manual

7-7. Remote Controller Servicing Functions

• The remote controller includes a number of servicing functions. Use these as needed for test runs and inspections.
List of Servicing Functions
Functions Description
Operation with forced
Test run
thermostat ON
Sensor
Temperature display
temperature
from each sensor
display
Servicing
Alarm history display
check display
Filter lifetime, operating
Simple mode priority, central
settings control address, and
other settings
System address, indoor
Detailed unit address, central
settings control address, and
other settings
Automatic address
Automatic setting based on
address command from the
wired remote controller
Address Change of indoor unit
change address

7-8. Test Run Function

Operates the unit with the thermostat forced ON.
<Procedure>
1 Press and hold the
longer.
2 "Test" appears on the remote controller LCD
display (Fig. 7-3).
3 Start operation.
4 Press the button to return to normal remote
controller display.
Button operation
Press and hold the
seconds or longer.
Press and hold the
buttons for 4 seconds or longer.
Press and hold the
buttons for 4 seconds or longer.
Press and hold the
buttons for 4 seconds or longer.
Press and hold the
buttons for 4 seconds or longer.
Press and hold the
timer operation
seconds or longer.
Press and hold the
timer operation
seconds or longer.
button for 4 seconds or
Reset operation
button for 4
and
and
Press the
button.
and
, and
and the
Automatic reset
buttons for 4
and the
Press the
buttons for 4
button.
1 4
7-15
Unit status
Current operation is
maintained.
When settings
are made from a
remote controller,
the indoor unit
where that remote
controller is
connected stops.
Entire system
stops.
2
3
CZ-RTC2
Fig. 7-3
7