Working With Licence Keys - Leica RX1200 User Manual

Getting Started with SmartWorx
4.5

Working with Licence Keys

Remote Licencing
Available programs
RX1210/RX1210T
Available programs
all RX1250 models
It is possible to temporarily transfer a program licence from TPS1200+/TPS1200
onto any of the RX1250 models. This procedure would only make sense when the
RX is to be used as a data logger.
For these models, only the RX firmware file is loaded. All programs are loaded onto
the GPS/TPS. Refer to "1.2.1 Software Concept" for further details.
For these models, a one program/one licence concept has been established. That
is, it is only necessary to load one file for each program and to activate one licence.
The program can be loaded in either GPS mode or TPS mode. Once loaded, the
program is available to both GPS and TPS (except TPS specific programs). A
program can also be removed from either GPS or TPS mode.
Available programs
Alignment Tool Kit
Cogo
Determine Coordinate System
DXF Export
DXF Import
RX1200 92
Licence Key