Leica RX1200 User Manual page 40

Setting up the Equipment
Description
3. Insert pole into the clamp hole.
4. Adjust the angle of the mounting plate and the height of the holder on the pole
to comfort.
5. Tighten the clamp with the tightening screw.
Once tightened, the button on the tightening screw can be
depressed to change the position of the handle for more comfort.
A locking mechanism is incorporated in the mounting plate of the
holder.
6. Before RX is placed onto the mounting plate ensure that the locking pin is put
into the unlocked position. To unlock the locking pin, push down the red button
situated on top of the mounting plate.
RX12_015
7. Hold RXabove the holder and lower the end into the holder.
RX1200 40