4.9.3
Working in Transparent Mode
Description
Access
step-by-step
Getting Started with SmartWorx
<ComMode: Transparent> enables the remote control of TPS with GeoCOM
commands. RX becomes a transparent radio modem, like the RadioHandle or
TCPS27B. GeoCOM commands can be sent from a computer to RX which are then
sent to TPS via RadioHandle or TCPS27B. These commands will be executed on
TPS and results can be sent back.
Description
1.
From CONFIGURE Interfaces on TPS ensure that GeoCOM Mode
is turned on and RCS Mode is turned off.
Proceed to the local menu of RX.
Select Main Configuration Menu: Radio/Comms Settings, Modes page.
2. Set <ComMode: Transparent>.
RX1200
107