Leica RX1200 User Manual page 72

Setting up the Equipment
Detach a clip-on-
housing step-by-
step
Description
Turn GHT56 over to gain access to the space for the clip-on-housing.
2. Place the clip-on-housing into position such that
• the guide rails on the GHT56 are aligned with the guide rails on the clip-
on-housing.
AND
• the LEMO port on the GHT56 is aligned with the connector on the clip-on-
housing.
3. Slide the clip-on-housing into position such that the connector is completely
plugged into the LEMO port. It clicks.
Do not turn the screw on the topside of the clip-on-housing. The clip-
on-housing is automatically fixed when completely plugged into
position.
Description
1. Press the small press clip next to the guide rail on the GHT56 to unlock the
clip-on-housing from the GHT56.
2. Slide the clip-on-housing away from the press clip until the connector is
completely unplugged from the LEMO port.
RX1200 72