Leica RX1200 User Manual page 78

Setting up the Equipment
Description of the LED's
IF the on
Config GFU14 with
LED Satelline 3AS,
GFU23
Data any device
transfer
LED
Signal GFU19 (US),
strength GFU25 (CAN)
LED with CDMA
MultiTech
MTMMC-C
GFU23
RX1200
is
red
off
green or flashing
green
red
flashing red
off
off
red
THEN
the device is in the configuration
mode controlled from the PC via
cable.
data is not being transferred.
data is being transferred.
device is on, not registered on
the network.
device is on, registered on the
network.
download mode or device is off.
no radio link to remote controller.
radio link to remote controller.
78