Leica RX1200 User Manual page 98

Getting Started with SmartWorx
Description
3. Press SHIFT CONF (F2) to enter the
Configuration screen.
4. Set Use Device=Yes. Select a free Blue-
tooth port. Press DEVCE (F5) to open a list,
displaying Bluetooth capable devices.
From the list, highlight and select the Disto
and return to the configuration screen.
Press SRCH (F4) to search for Bluetooth
devices. Select the Disto device from the
list of Bluetooth devices found and return to
the configuration screen. Press CONT (F1)
to establish the data connection.
5. Measure the required distance with the
Disto. Press and activate the 2nd key on
the Disto. Press the Bluetooth key on the
Disto to send the measurement to the RX.
The distance will be sent and displayed on
the RX screen.
RX1200 98