Connecting To The Disto - Leica RX1200 User Manual

4.7

Connecting to the Disto

Connecting
step-by-step
Getting Started with SmartWorx
Description
1. Turn on the Disto. Press the Bluetooth key
to activate Bluetooth. The Bluetooth icon
will display on the Disto screen and will
continue to blink until there is a successful
data connection to the RX. Bluetooth will
switch off on the Disto if the connection is
not established within 240 sec.
2. Ensure that the RX is in GPS mode. Go to
the Survey program and to the Survey
Begin screen. Enter the appropriate infor-
mation and press CONT (F1) to continue to
the Survey screen. Ensure that the Survey
page is active. Press H PNT (F5) to
continue to the Hidden Point Measurement
screen.
RX1200 97