Fixing The Rx To A Gnss Receiver - Leica RX1200 User Manual

Setting up the Equipment
3.1.3

Fixing the RX to a GNSS Receiver

Fixing the RX to
GNSS receiver
step-by-step
Description
1. Hold RX above the recess in the housing of
the GNSS receiver intended for the unit.
2. Lower the bottom part of RX into the recess
in the housing of the GNSS receiver.
3. Apply slight pressure in a downward direc-
tion and then lower the top part of RX until
the unit is clicked into the GNSS receiver.
The recess in the housing of the GNSS
receiver helps to guide RX.
RX1200
1
RX12_008
44
2