Removing The Latch - DFI EC200 Series User Manual

Hide thumbs Also See for EC200 Series:
Table of Contents

Advertisement

2. The system board is equipped with a Mini PCIe slot. The Mini PCIe slot sup-
ports full length or half length Mini PCIe / mSATA card. Note the key on the
slot. The key ensures the Mini PCIe / mSATA card can be plugged into the
slot in only one direction.

Removing the latch

If you want to move the latch in order to use the desired card, please follow be-
low steps:
1. Remove the clips at each end of the latch once at a time.
2. Press the clips to the center of the latch and pull it up.
Press to
the center
3. Pull the clips up and remove the latch.
Pull up
Installing Devices
Half length
Full length
Latch
3
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ec210 seriesEc220 seriesEc221 series

Table of Contents