Advertisement
LED Indication
Removing the Chassis Cover
Please read and follow the instructions below to open the system.
1. Make sure the system and all other peripheral devices connected to it have been
powered off.
2. Disconnect all power cords and cables.
Step 1:
The 2 screws on the bottom of the system are used to secure the bottom cover to the chassis.
Remove the screws and put them in a safe place for later use.
open the system.
Step 2:
The heat shield can be easily accessed after the chassis cover is removed.
Quick Installation Guide |
Status LED
Suspend Mode
S0
S1
S3
S4, S5
HDD LED
LED Behavior
Blink
Off
HDD present or HDD not present
Lift the bottom cover upward to
LED Behavior
Always ON
Quick Blink
(cycle 1 sec)
Slow Blink
(cycle>1 sec)
Off
Status
Disk access activity
4
Advertisement
