Updating The Bios - DFI EC200 Series User Manual

Hide thumbs Also See for EC200 Series:
Table of Contents

Advertisement

Updating the BIOS

To update the BIOS, you will need the new BIOS fi le and a fl ash utility, AFUDOS.
EXE. Please contact technical support or your sales representative for the fi les.
To execute the utility, type:
A:> AFUDOS BIOS_File_Name /b /p /n /c
then press <Enter>.
.
[C:\LANID\INTEL]>AFUDOS fi lename.ROM /B /P /N /C
+--------------------------------------------------------------------------------------------------------+
|
|
Copyright (C) 2009 American Megatrends Inc. All Rights Reserved.
+--------------------------------------------------------------------------------------------------------+
- Bootblock checksum .................
- Module checksums ...................
- Erasing fl ash .............................
- Writing fl ash .............................
- Verifying fl ash ..........................
- Erasing NVRAM ......................
- Writing NVRAM ......................
- Verifying NVRAM ...................
- Erasing Bootblock .....................
- Writing Bootblock .....................
- Verifying Bootblock ..................
- CMOS checksum destroyed
- Program ended normally.
[C:\LANID\INTEL]>
AMI Firmware Update Utility v4.33
ok
ok
done
done
done
done
done
done
done
done
done
7
BIOS Setup
|
|
155

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ec210 seriesEc220 seriesEc221 series

Table of Contents