DFI EC200 Series User Manual page 143

3. Press <Enter> to confi rm the new password.
Security Settings
Supervisor Password
User Password
Change Supervisor Password
Change User Password
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
4. When the Password Installed dialog box appears, click OK.
Security Settings
Supervisor Password
User Password
Change Supervisor Password
Change User Password
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
To change the password, repeat the same steps above.
To clear the password, select Change Supervisor Password then press <En-
ter>. The Password Uninstalled dialog box will appear.
If you forgot the password, you can clear the password by erasing the CMOS
RTC (Real Time Clock) RAM using the Clear CMOS jumper. Refer to the Jump-
er Settings section in chapter 2 for more information.
BIOS SETUP UTILITY
: Not Installed
: Not Installed
Confi rm New Password
BIOS SETUP UTILITY
: Not Installed
: Not Installed
Password Installed
[OK]
BIOS Setup
Security
Install or Change the
password.

Select Screen

Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
Security
Install or Change the
password.

Select Screen

Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
7
143