Removing The Chassis Cover - DFI ED700-EHL22I Quick Installation Manual

Removing the Chassis Cover

Please observe the following guidelines and follow the instructions to open the system.
1. Make sure the system and all other peripheral devices connected to it have been
powered off.
2. Disconnect all power cords and cables.
Step 1:
The 5 screws on the bottom of the system are used to secure the cover to the chassis.
Remove the screws and put them in a safe place for later use.
Step 2:
Lift the cover to open the system.
The board can be easily accessed after the chassis cover is removed.
Quick Installation Guide | ED700-EHL22I
3